Skip to main content
Stesso

Run All Functions Under Load

15:15
17:27
12.8K views

At 15:15 in

DON"T buy an excavator like this!

Watch on YouTube

What happens here

The most comprehensive test is to run every single function of the mini-excavator: drive forward and backward, turn, operate the boom, arm, and bucket through their full range of motion, and raise/lower the blade. Crucially, try to put the machine under a light load (e.g., digging a small trench or lifting a heavy object). This will reveal how the engine performs under stress and expose any weaknesses in the hydraulics, engine power, or structural components that might not be apparent during idle operation. A machine that 'dogs out' or struggles under load is likely to fail in demanding or extreme conditions.

Goal: Operate all machine functions, including driving, swinging, and lifting, and put the machine under a light load to fully assess its performance and identify hidden issues.

What they say

Hide

think we've covered almost everything. Look at the quality of the tracks. That's also an indicator. Look for rips and tears. Run them all the way around. Check your boom sloppiness. Check your cylinders, hoses, fluids. Run the machine forward and backward. Turn it. It should have enough power in a turn. Run your blade up and down. Also check that. Run every single function on that machine that you possibly can. And put it under a load. If you can dig with it or load with it or do something. Absolutely. Put it under a little bit of load to hear how that because when that engine is, you're going to know the overall condition of the engine when you put it under a load. Just running it. It may sound okay, but once you start to work it, if that thing dogs out on you, uh, that's an indicator that you could have some problems and it may be just something that's a bargaining chip. Anything else, guys?

Auto-generated from the video audio.