Skip to main content

Apply Primer Evenly with Controlled Strokes

1:15
12:01
334.2K views

At 1:15 in

DIY Rolling Walls LIKE A PRO!

What happens here

After initial loading, apply the primer by rolling in smooth, continuous up-and-down motions. Reload your roller after approximately one pass or every 9-inch section to ensure consistent coverage. Pay attention to the direction your roller is facing; apply pressure in the direction the roller is facing to keep the cover securely on the frame and prevent it from 'walking off'. When approaching the top and bottom edges of the wall, significantly reduce pressure to avoid creating heavy paint spots that can lead to drips or runs. Continue this technique across the wall, laying out the paint from top to bottom.

Goal: Apply primer with even strokes, loading the roller frequently and adjusting pressure to avoid heavy spots or streaks, especially at the top and bottom of the wall.

Tools and materials

  • Extension Pole
  • Paint Roller Cover
  • Paint Roller Frame
  • Primer (Grey)

What they say

Hide

just like that I'm gonna back up again I usually do one pass and then load it up so it's young little unloading it from top to bottom and one here's an another thing I'll show ya I just flipped over to my roller now I've got it direction when you're actually rolling if I'm low in this direction I want to go the direction the roller is actually facing as I'm creating pressure it's pushing the roller onto the roller frame always if I flip it over and roll this way your roller can actually work itself off the frame if you don't have a good tight connection between the two if you use royalty or play these high-quality rollers frames would use these blue Tigers it's never going to work itself off so I don't have to worry about the direction that I'm facing it's not as critical but some professional painters think it's pretty important that you always roll the same correction but to come over here now I've got a lot of paint on the wall I'm gonna begin my layout so I'm just laying it out I cut it this way so I can get close to the wall otherwise my frame would be hitting the wall site you can get close to the wall lay now I like the laid out from top to bottom come as close as I can as the ceiling laid out from top to bottom laid out on top the bottom it's pretty important this color right here probably would never see an issue with black marks or streaks with this color and this paint but if I was using like a vibrant red there's something like that that's where the Malayan out is very important so unloading it from top to bottom I'm listening for this downward roller by trying to continue to go yo this direction to continue to unload it it'll start to hiss more and more you'll start to make a lot of sound I know now I'm what what we're doing is called dry mapping my roller is no longer putting out paint but it'll actually start taking off paint so I want to keep this thing loaded up all the time and I and I hold my extension pole I get it in my hands to a point where when I'm fully reached I'm about you know that bar from the ceiling that way I know I'm not gonna accidentally hit my ceiling so I laid it out from there I'm not gonna lay out continue working right along not too much pressure type you put a lot of pressure the top right come down that's gonna leave a heavy spot at the top that's gonna run say if you come down here a lot of pressure right there it's going to leave a heavy spot right there that's gonna run too so as I get to my ends I'm gonna put a…

Auto-generated from the video audio.