Prepare Metallic Paint and Rollers

floors. So, now I'm ready to go. I'm going to get my product loaded in a pan. I'm only doing one wall, so I'm just going to be using just 9in pan. I like to use a 2gallon deep dish pan. And once again, got the microfiber roller. We're going to be using just a short extension pole so I can reach from top to bottom without getting on a ladder. So, I got my metallic grit. It's been mixed up to the color that I want right here. One thing with the metallic grit, the grit itself stays suspended. You don't have to continually stir it or anything. Once it's been mixed and chicken really well, it's good to go. So, I don't have to stir it. So, I put some in my pan, and I'll leave some in my my gallon can here, just in case I need to roll out of a bucket here up top. One thing you want to do, definitely want to pre-wet your microfiber rollers. I got to pre-wet these things and clean them to get them ready for use. Just want to make sure you don't have any lints on your microfiber rollers. Loose lints or they'll get into your decorative coating. Here's a new product