Skip to main content
Stesso

Prepare Wire Mesh Reinforcement

3:40
11:06
589.9K views

At 3:40 in

DIY Concrete Countertops For DUMMIES

Watch on YouTube

What happens here

To prevent unwanted cracking and enhance structural integrity, embed wire mesh reinforcement within the concrete. Purchase a 4x8 foot sheet of 1/8 inch wire mesh from a hardware store. Cut the mesh to fit the mold, ensuring it reaches close to the edges (at least 1 inch away) without extending beyond them, which could cause rusting or chipping. Use appropriate shears for cutting the mesh.

Goal: Cut and prepare wire mesh to reinforce the concrete slab and control cracking.

Tools and materials

  • Electric Shears Ryobi — Cutting the wire mesh to size
  • Gloves — Hand protection during cutting
  • Safety Glasses — Eye protection during cutting
  • Wire Mesh — Reinforcing the concrete slab

What they say

Hide

sure that there's no voids left in the area then we're gonna create our reinforcement I bought this four by eight sheet from my local hardware store it's an eighth inch thick I just use some shears to cut it off the trick is to bring it as close to the edges of the mold as possible without it actually being shown out of the edges the more it comes out the more protection that you will have as the granite is or concrete is suspended on the two by fours or whatever you have it I'm going to use

Auto-generated from the video audio.