Skip to main content
Stesso

Measure Complex Perimeters with Height Variations

0:25
1:01
4.9K views

At 0:25 in

Difficult Measuring Just Got Easy! #equipexpo #measuringtool @MOASURE

Watch on YouTube

What happens here

After measuring an irregular segment, you can switch back to straight line mode if the next section of your perimeter is straight. The Moasure device is capable of recording points at different elevations. To demonstrate this, place the device on various elevated surfaces, such as a 'Mini Joint Filler' machine or another 'higher tool', and mark points. Then, return the device to the ground level and continue measuring until you reach your starting point, thereby completing the perimeter. This process captures a complete 3D representation of your measured area.

Goal: Create a complete perimeter measurement including varying elevations to generate 3D data.

Tools and materials

  • Higher Tool — As a surface to demonstrate a higher elevation point (example prop)
  • Mini Joint Filler Machine Optimas — As a surface to demonstrate an intermediate elevation point (example prop)
  • Moasure Device Moasure — Recording points at varying elevations as part of a perimeter measurement
  • Smartphone — Managing measurement modes and viewing the evolving perimeter

What they say

Hide

Like this. And we got the exact movement there, capture. That's awesome. I'm going back to straight line mode. I'm going to put it on this machine over here. Like so. I'm going to put it a bit higher up on this bit over here. Pop it back down on the floor. And then I'm going back to the yellow stripe, which is over there somewhere if I can remember. That's it. That's the area I've done. The perimeter is 42.7 foot. The area is 99.7 square feet.

Auto-generated from the video audio.