Self-Feed Bit Demonstration (Wood Drilling)

how do we illustrate this so what we have here is pressure-treated lumber four by six they were using Makita drills to make some hole into this wood three holes that's the target we're using handles on our drills but we will not apply any pressure just let the seal selphie bits do the work I'm using the new Diablo speed demon selfie fit the size is 2 a 9/16 of an inch I'm using the Milwaukee switchblade two 9/16 7/16 shank we are at the same speed we're on low and twenty-one torques okay before you start so we're gonna do three quick holes on here notice the way the bid it's going to pull itself in and then we're actually the way we're on the same line it's three quarters of an inch just so you can actually visibly see it and hopefully you go to see the difference of the public cup so when you're ready guys one two three [Music] great okay so as you can see both are pretty brutal really and I think our battery might be a little bit lower than that but at the end of day you hopefully can see that the speed and we encourage you guys to come here and try this afterwards so alright let's take a closer look at that demonstration because honestly I don't know what I was seeing I mean the old bits seemed to perform the Diablo performed better let's take an up-close look to see what's going on maybe we can figure it out together and that's how you make potato chips with the Diablo bit is there right okay see the bit okay see the bit