Skip to main content
Stesso

Mount Ceiling Plate and Install New Detector

0:35
1:06
72.3K views

At 0:35 in

Day in the Life of an Electrician, Fixing a Smoke and Carbon Monoxide Detector, Thoughts?

Watch on YouTube

What happens here

After wiring the jumper cable, the electrician attaches the new ceiling mounting plate, which usually comes with the new smoke detector, to the existing metal electrical box in the ceiling. He uses an impact drill with a Phillips head bit to quickly and securely screw the plate into place. This method helps to save his wrist from repetitive strain. Once the plate is secure, he plugs the new smoke detector into the newly wired jumper cable and then twists the detector firmly onto the mounting plate until it locks into position.

Goal: Securely install the new smoke detector on the ceiling.

Tools and materials

  • Impact Drill — To efficiently screw the ceiling plate to the electrical box
  • New Ceiling Plate Kidde — The base for mounting the new smoke detector
  • New Smoke Detector Kidde — The main unit of the smoke and carbon monoxide detector
  • Phillips Head Bit — To drive the screws for the mounting plate

What they say

Hide

is off. This was a 120 volt hardwired smoke detector with one black hot wire, one white neutral wire, and one red traveler wire. I wired out my connections to the new jumper cable and mount the ceiling plate. I make sure to have my impact drill so I can screw the back plate to the metal box. Didn't want to use a screwdriver so I can save my wrist. Don't want to get carpal tunnel. I connect the new detector. Job finished. I turn back on the circuit breaker. I saw the green light. No more beeps. The lady was happy. I was in and out about 30 minutes. I pack my stuff

Auto-generated from the video audio.