Skip to main content
Stesso

Terminate Cat5e Wall Outlet

0:37
0:45
30.2K views

At 0:37 in

Day in the Life as Low Voltage Electrician, using my @FenixLightingUSA Headlamp, Best Lamp, Thoughts

Watch on YouTube

What happens here

After completing the IDF cabinet terminations, move to any individual wall outlets requiring Ethernet connectivity. This process is similar to the patch panel. Strip the outer jacket of the Cat5e cable entering the wall box. Untwist and straighten the wire pairs. Consult the color-coded diagram printed on the Ethernet wall jack itself, which will indicate either T568A or T568B standard. Arrange the wires according to the chosen standard and use the punch-down tool to terminate each wire into the corresponding terminal on the wall jack. Once all wires are securely punched down and trimmed, snap the terminated jack into a standard wall faceplate and screw the faceplate onto the wall box.

Goal: Provide a functional Ethernet connection at a wall outlet.

Tools and materials

  • Punch-down Tool — Seating and trimming Cat5e wires into wall jack terminals
  • Screwdriver — Securing the wall faceplate
  • Wire Stripper — Removing the outer jacket of Cat5e cables
  • Cat5e Wire — Providing network data connectivity to the wall outlet
  • Ethernet Wall Jack — Providing an accessible Ethernet port
  • Wall Faceplate — Covering the wall box and providing a clean finish for the jack

What they say

Hide

voltage before he gets too old. I'm learning like a sponge. Us younger tradesmen are a dying breed. My dad is showing me the color coding for data wire which is brown, orange, green, and blue. There are always eight wires in one data cable. Once we terminated 27 lines, the job was complete. Customer is satisfied. I put my tools away and my Phoenix headlamp. Now, that's what a day looks like as an electrician.

Auto-generated from the video audio.