Cut Inside Corner Right Piece ('Inside Opposite' with Flip)

0:31

1:10

14.2K views

At 0:31 in

Cutting crown with single bevel saws

Watch on YouTube

What happens here

To cut the right piece for an inside corner, place the crown molding upside down on the right side of the miter saw's table, again with the ceiling edge against the fence and the wall edge on the table. Keep the saw's bevel set to the right and perform a miter cut to the left. This completes the 'inside opposite' pair for the corner, as the crown is flipped but the saw's bevel direction remains consistent.

Goal: Successfully cut the right crown molding piece for an inside corner using the 'flip' technique.

Tools and materials

Crown Molding Piece — The material being cut for the right inside corner
Miter Saw — Making the miter and bevel cuts

What they say

(428 characters)

Hide

going to cut inside opposite, our left side crown molding goes on the left side and the saw goes to the right, bevel to the left. Now, since we can't move our bevel in this direction, we need to cut our right side. So, all we're going to do is just flip it upside down. That's an inside corner. Outside corner, we're going to put our right piece on our right fence. Our miter is going to go to the right side, so we can cut this

Auto-generated from the video audio.