Cut Inside Corner Left Piece ('Inside Opposite')

0:15

1:10

14.2K views

At 0:15 in

Cutting crown with single bevel saws

Watch on YouTube

What happens here

To cut the left piece for an inside corner, place the crown molding upside down on the left side of the miter saw's table, with the ceiling edge against the fence and the wall edge resting on the table. Keep the saw's bevel set to the right (as per the single-bevel capability) and perform a miter cut to the right. This aligns with the 'inside opposite' rule, where the miter is opposite the side of the wall it will be installed on.

Goal: Successfully cut the left crown molding piece for an inside corner.

Tools and materials

Crown Molding Piece — The material being cut for the left inside corner
Miter Saw — Making the miter and bevel cuts

What they say

(410 characters)

Hide

For 38° crown, set your bevel to 33.9 and set your miter to 31.6. Same rules are going to apply. Inside opposite, outside the same. Just with a little flip. So, if we're going to cut inside opposite, our left side crown molding goes on the left side and the saw goes to the right, bevel to the left. Now, since we can't move our bevel in this direction, we need to cut our right side. So, all we're going to do

Auto-generated from the video audio.