Skip to main content

Cut Inside Corner Pieces

0:15
1:10
14.2K views

At 0:15 in

Cutting crown with single bevel saws

What happens here

To cut the left piece of an inside corner, place the crown molding on the left side of the miter saw's fence, ensuring the ceiling-facing edge is against the fence. Set the miter angle to the right and the bevel angle to the left (this is the saw's single bevel direction). For the corresponding right piece of the inside corner, flip the crown molding upside down (so the wall-facing edge is now against the fence) and place it on the right side of the saw's fence. Keep the miter angle set to the right and the bevel to the left. The rule mentioned is 'inside opposite, outside the same,' meaning for inside corners, the molding piece's orientation (left/right piece) is opposite to the saw's miter direction.

Goal: Create two pieces of crown molding that form an inside corner.

Tools and materials

  • Crown Molding — The material being shaped into inside corner pieces
  • Miter Saw — Precisely cutting the crown molding to create inside corner angles

What they say

Hide

and set your miter to 31.6. Same rules are going to apply. Inside opposite, outside the same. Just with a little flip. So, if we're going to cut inside opposite, our left side crown molding goes on the left side and the saw goes to the right, bevel to the left. Now, since we can't move our bevel in this direction, we need to cut our right side. So, all we're going to do is just flip it upside down. That's an inside corner. Outside corner,

Auto-generated from the video audio.