Understand the Catalyzing Process and Benefits

would be over uh five to six hours and then you can re-um cross-link it again so um i think if i said that wrong it's cross-linking so if you cross-link it and the pot life ends you can re-cross-link it you just have to add a certain amount of the product back in fresh product and then you can re-cross-link it it's one of the beauties of a cross-linker but um you're not adding a whole lot to the product and you're spending a lot more money cross-linking it so it's better just to either use it 1k right out of the can or the pot or to catalyze it now we'll talk a little bit about what catalyzing does to the product itself okay so the 2800 series products in all that line the flat satin semi-gloss gloss products um you can catalyze them and catalyzing is adding a hardener to the product which um adds a pot life to it so it's um there's a five to six hour pot life so there's a window that you got to make sure that you clean your sprayer out before that paw life ends because you could ruin your product because what it does the product starts to harden even in the can so it gets super hard and you would actually ruin your sprayers so catalyzing what it does you're adding a hardener to the paint and it gives you better bonding capabilities it makes the product product harder like a cross linker it adds chemical resistance it adds water resistance it does add chip mar and scratch resistance and then by