Construct the Wooden Frame

What happens here

Using 2x4 lumber, begin constructing the base of the enclosure on the floor. Measure and cut four pieces to form a 10-foot by [appropriate depth for the enclosure, based on screen size, though depth is not explicitly stated for the base, just width and height of opening]. Apply wood glue to the ends of the lumber pieces before screwing them together at the corners using a cordless drill. Once the base is complete, erect the vertical 8-foot posts and secure them to the base and top horizontal pieces, again using wood glue and screws to create a rigid, self-standing frame. Ensure all joints are tight and square for stability.

Goal: This step details the assembly of the primary wooden frame for the golf simulator enclosure, ensuring it meets the specified width and height. It involves cutting, gluing, and screwing 2x4 lumber to create the base, uprights, and top beams of the structure.