Skip to main content

Consider this video before buying an Electric Car.. #electrician #bluecollar

1:10
9.2K views

Video by Hendy The Sparky

Hendy The Sparky

What happens here

This project details the installation of a Tesla Wall Connector (EV charger) in a garage. It involves running dedicated electrical wiring (6-3 Romex) from a 50-amp circuit breaker in the main electrical panel through a finished basement ceiling, minimizing structural impact by utilizing existing recessed light fixtures as access points. The wire is then encased in 3/4 inch EMT conduit in the garage, leading to the wall-mounted charger, providing both indoor and outdoor charging capabilities for a Tesla Model Y.

Transcript

Hide

all right we just installed an electric vehicle charger Tesla wall connector here is our 50 amp breaker 63 RX going up and across and guys it was a full finished basement ran the line here is a ceiling patch ran the line here to here to here and as we go over here we ended up actually coming behind the bar and we ended up taking out these recess lights and using these as access points and we ran the line straight here and end up only needing to cut one hole out of the whole entire finished basement and then when you come to the garage we end up coming right near the front door and we come up with 3/4 in EMT conduit we ran six gauge wire for a 50 amp Tesla wall connector and as you can see guys it came out beautifully here is the customer's Tesla Model y he wanted it here specifically so it gives him the freedom to charge indoors and Outdoors so that's why we always recommend to install in the corner but yeah overall came out very nice and clean let us know how much would you charge for this job

Auto-generated from the video audio.