Skip to main content
Stesso

Deep Cleaning with Wire Brush

1:15
3:22
89.4K views

At 1:15 in

Cleaning A Paint Brush. Life Hacks to Clean Painting Tools.

Watch on YouTube

What happens here

After the initial rinse, some dried paint may remain around the edges of the bristles. To address this, take the paintbrush and place it on the rim of the 5-gallon bucket. Use the stainless steel wire brush with light pressure to gently scrape and work the dried paint off the bristles. It's crucial not to apply too much pressure to avoid damaging the bristles. Continue this process, inspecting the bristles to ensure all dried paint is removed.

Goal: Remove stubborn dried paint from the brush bristles.

Tools and materials

  • 5-gallon bucket — To support the paintbrush while scrubbing
  • Paintbrush — The brush being cleaned
  • Purdy wire brush Purdy — Scrubbing off dried paint

What they say

Hide

then there's going to be some dried paint around the edges of the bristles and stuff and that's where our wire brush. We take our 5gallon bucket and we actually just set our paint brush on the end of the 5gallon bucket. And then we begin just working the paint off the bristles lightly with our wire brush. You don't want to put too much pressure and and put too much pressure on the bristles cuz you don't want to damage the bristles, but just light pressure. And then just begin working that paint. And you're just going to take it, swish it back down on the bottom. Continue to rinse it out. And then you'll see if there's any more paint on the bristles. And I like to flare the bristles out, look and see, make sure there's no dried paint anywhere inside. Begin working more of this paint off. I can see a little bit more paint on these bristles. I'm going to continue working that paint off. And then dip it back down. And now my paint. There's quite a

Auto-generated from the video audio.