Engine Oil & Filter Change (Red Honda Foreman)
At 1:36 in
CHINA JUNK! Farmer's regretful purchase gone BAD!
What happens here
The creator prepares the red Honda Foreman ATV for an engine oil and filter change by driving it onto Strong Made car ramps to elevate it. He removes the ATV's seat by lifting it and then detaches the side panel by popping out several clips to access the engine components. He loosens the oil filler cap. Going underneath the ATV, he uses a 17mm socket and ratchet to loosen and remove the drain plug, allowing the old engine oil to drain into a drain pan placed on cardboard. He then removes the oil filter cover using an 8mm wrench and replaces the old oil filter with a new Honda brand filter (part # 15412-HM5-A10), being careful with the o-ring and spring. After reinstalling the filter cover, he replaces the drain plug. He fills the engine with 3.2 quarts of Pro Honda GN4 10W-30 motor oil, demonstrating a pouring technique to prevent "glugging." Finally, he marks the new oil bottle and resets the service interval light on the dashboard by pressing a button while turning the key.
Goal: Replace engine oil and filter on the Honda Foreman
Tools and materials
- 17mm Socket — Removing the oil drain plug
- 8mm Wrench — Removing the oil filter cover
- Cardboard — Protecting the floor from spills
- Drain Pan — Collecting old oil
- Funnel — Preventing spills when refilling oil
- Honda Oil Filter — Replacing the old oil filter
- Marker — Marking used oil bottles
- Paper Towels — Wiping spills and cleaning parts
- Pro Honda GN4 10W-30 Motor Oil Honda — Refilling the engine
- Ratchet — Using with the socket to remove the drain plug