Assembling the First Cabinet Carcass

What happens here

With the plywood components cut and prepared, the presenter applies wood glue along the dado grooves of the side panels. The bottom panel is then slid into the dadoes, and the back stretchers (with pre-drilled pocket holes) are attached using wood glue and pocket screws. The front stretchers are also attached, ensuring everything is flush and square. This assembly method creates a strong and durable cabinet box. The presenter highlights the use of pocket hole clamps for secure fastening and stresses the importance of keeping all joints flush to minimize sanding later.

Goal: The first cabinet carcass is assembled using wood glue and pocket screws, creating a sturdy box structure with carefully aligned components.