Cut and Install Desk Countertops

strips, feed it through here. There's two little screws. Press this together plus and minus. And then, uh, the wires that we already ran, they were 18 gauge. So based on my calculation, it's sufficient enough to carry the power cuz it'll get, you know, less and less dim [music] um as uh or more dim, I guess, as you go on the further with these strands. But you do need what's called a driver. And this is essentially power conversion from 120 volt that's coming out of your wall and bring it down to only 24 volts for the LEDs or 12 volts depending on the size you went with. But I did my calculations. I think I got everything right. In order to keep it the most safe and keep it the most amount of light from it, we're going to do, I think, three drivers. One for that strand, one for this wall, and then one for the the back accent wall. Uh, I think we got everything here, but we're going to find out if we screwed up on something. Well, we got some good news. It works. The driver is working great. I'm just borrowing power temporarily. We'll feed it [music] all through. We'll be fine. Uh, now the whole game is going to be