Connect Electrical and Install Lighting

What happens here

Electrical connections are made to power the lighting and TV. The host identifies an existing outlet near the bar, which will be the power source. He uses an oscillating multi-tool (Ryobi oscillating multi-tool) to cut a hole in the drywall above the bar to install a junction box. Electrical wire is then fed from this box down to the existing outlet. Recessed LED lights are installed into the pre-cut holes in the drop ceiling. The wires for these lights and the LED strips behind the TV are connected, ensuring everything is properly wired and safe. A switch is installed to control the lights, and the TV is mounted to the accent wall.

Goal: Electrical wiring is run from an existing outlet to power the recessed lights and LED strips in the bar's drop ceiling and accent wall.