Assemble Cabinet Carcasses

and a right now i have all right all right let's put this puppy together we're gonna need appropriate pocket hole screws inch and a quarter based off of the wood that we're using we're going to use a few dashes of wood glue just to make sure this thing is indestructible [Music] this is a 45 degree angle it's mounted in the back like that right it's got a little hole this is the other side of the 45 degree angle this will be mounted on the wall like this but essentially this will just sit like that [Music] uh doing the two side towers we'll call it like the bookshelf part i'm going to cut them down in 12 inches and why am i doing them in 12 inches well because original is gonna do 14 inches and then i realized i would need three and a half sheets plus another one so then i said ah let's make it easier let's do 12 inches that way one sheet i'll get all four and i'll make it easier we'll save much money [Music] so each tower is going to have four shelves what i'm going to do is use the pocket holes as well to attach them permanently in place so my mad man approach here is to make sure i have a consistent spread here so i'm using a board that's 21 inches a little bit of glue secured in place okay so she's done now am i going to pick it up i don't know kyle do you mind helping [Music] so i want to create a beefier look on the sides and space it out about four inches on each