Skip to main content
Stesso

Finishing the Concrete Countertop

2:05
19:50
9.3K views

At 2:05 in

Building a secret garden, and trim details with a NEW WOOD PRODUCT!

Watch on YouTube

What happens here

The concrete countertop atop the fire pit structure is processed to achieve a polished finish. First, a cut-off saw is used to trim approximately one inch from the rough edges, ensuring a clean and precise perimeter. Following this, a grinding wheel is employed to remove the top layer of concrete, exposing the aggregate underneath. Finally, an orbital sander with various diamond wet sanding pads is used, with continuous water application, to progressively smooth and polish the surface.

Goal: Achieve a smooth, polished finish on the concrete countertop for the fire pit.

Tools and materials

  • Cut-off Saw — Trimming rough edges of the concrete countertop for a clean finish
  • Grinding Wheel — Removing the top layer of concrete to expose the aggregate beneath
  • Hose — Continuously applying water during the wet sanding and rinsing processes
  • Leaf Blower DeWalt — Drying the concrete surface after rinsing
  • Level — Checking the flatness and overall levelness of the finished surface
  • Orbital Sander DeWalt — Wet sanding the concrete surface with different grit pads for polishing
  • Diamond Wet Sanding Pads — Polishing the concrete to a smooth, finished state
  • Water — Wet sanding and rinsing the concrete surface

What they say

Hide

the pattern just like we did over there all right so we're working on uh our secret garden fire pit area we're getting our pavers down we got the base all done and everything uh same thing we did over there we're just laying them all down uh we set it to our thickest thickness so like this is a thick one right here it's right at the height that we need we'll go around after we get the whole pattern done we'll lift up the lower ones and we'll add some more setting beds so that everything's level we've got our our uh top here worked out pretty good wasn't perfect we're still working on getting getting this concrete you know situation perfect we messed up that countertop last time this turned out a lot better what we ended up doing was the edges were a little bit rough so we went around with our cut off saw we cut an inch off of everything to give it a nice clean Edge um and now what we're doing is we're grinding it down to give it this uh you know polished finish so we just took a grinding wheel to it got all of that top layer off to expose some Aggregate and now we're going to we're going to wet sand it with a couple different couple different grits and we're going to get this thing looking nice looking really nice so fire ped will go right in the center then we'll get to the outside [Music] oh [Music]

Auto-generated from the video audio.