Skip to main content
Stesso

Part Handling and Storage

4:45
27:48
17.2K views

At 4:45 in

Building a PLOW from Scratch in 3 hours 4K

Watch on YouTube

What happens here

After welding, the components, such as moldboards and frame parts, are shrink-wrapped onto pallets. This is done primarily for safety reasons, ensuring that heavy metal parts are securely bundled during transport around the factory floor by forklifts. This prevents parts from falling and causing injury or damage. The narrator explains that while experienced forklift operators might be able to move them without incident, shrink-wrapping provides an essential layer of safety, especially when dealing with heavy, irregularly shaped metal pieces.

Goal: Secure and prepare welded components for further processing and transport.

Tools and materials

  • Forklift Unspecified — Transporting heavy pallets of components around the factory
  • Pallets Unspecified — Base for stacking and transporting components
  • Shrink Wrap Unspecified — Securing components onto pallets for safe transport

What they say

Hide

okay all right so what we just saw on the moldboard W welding cell was before the robots actually struck an arc and started welding the parts yeah they stick the wire out of the torch just a little bit they give I think about a/2 inch out of the torch M and what it goes is it goes and it pokes the parts and it finds where the two pieces of metal actually meet to find the weld seam just in case that parts off just a little bit it'll actually use the wire it'll find the weld seam and it'll remember where it actually is on that one specific part so it'll go around find all the seams and when it's ready it'll go and strike the arc and use those corrections to give us a perfect well Aha and that's called touch sents yes all [Music] right so what's with the shrink w cuz you're just going to unshrink wrap it right yep yep so we have to shrink wrap the pallets of the mold boards just due to safety concerns so we're picking these up with a forklift we're moving around on the shop floor of course a great operator might be able to move without them falling off but we need to be safe if an operator has to stop a for Cliff or make a quick turn to avoid an accident we don't want a pile of 140 lb coming down on whoever's feet might be around we found just a little bit of shrink wrap best way to get it done

Auto-generated from the video audio.