Skip to main content

Secure AN Lines and Final Check

33:00
42:57
43.7K views

At 33:00 in

Budget Turbo Yukon XL 4L80 Conversion: AN Line Conversion! Best Transmission Cooler Line Upgrade

What happens here

Secure the newly assembled AN lines with zip ties or other appropriate fasteners, ensuring they are tightly bundled and well away from potential hazards like the exhaust system or sharp edges. The lines should be tight enough to prevent movement but not so tight as to crimp the hose or restrict fluid flow. After securing the lines, double-check all fittings for tightness and proper alignment.

Goal: Ensure lines are safely installed and ready for operation.

Tools and materials

  • Zip Ties — Securing the new AN lines

What they say

Hide

no we gotta use lube too i guess my spit's not good enough oh my god that's what she said we need you [Music] what i'd really like someday is one of those uh crimper things they're kind of like hydraulic and they're a inlines but they use a crimp collar instead of the screw on tight is that helping um it hurts my hand but i feel like it's helping i don't know i'm not really sure if it's good to twist or not whatever i'll just stop i don't know well you could just kind of hold it up and let it twist that way that's what i did when you're doing it but not so that it hits the wrench you're getting closer yeah this one doesn't wanna there we go just takes a little bit of finesse with this wrench because it it's designed to flex so you don't over tighten stuff and it'll want to pop off if you press too hard but if you give it tension and let the flex kind of carry it you can get it to line up perfectly the whole way it's just kind of a little bit tedious damn i don't think that's good no i don't like that ah what are we gonna do about this it's like oh i don't know if it's just that i feel like that's going to restrict some type of flow and it's bad yeah i think just the metal framing inside is just bent from being kinked and we'll just have to kind of work it around it's like a straw that you bite it'll be okay yeah as long as you didn't chew the straw up completely i think it's okay but at the same time we don't want it to be kinked and restrict fluid flow and have that be the reason that the transmission dies oh yeah that's a good point yeah that's why i'm sort of concerned looks better already yeah i think that i think that did it well good to you yeah it looks fine sweet and by flyers i mean vice grips because i couldn't find pliers in 10 seconds it took me to look in that box let's do it and since this is the same

Auto-generated from the video audio.