Lay Pavers and Create Patterns
At 0:19 in
Big change. #paverpatio
What happens here
Begin laying the pavers directly on the screeded bedding sand, following the predetermined pattern and design (light-colored rectangular pavers for the main walkway, darker smaller pavers for the curved accent areas, as seen in the video). Start from a straight edge, typically against the house or a permanent structure. Maintain consistent joint spacing between pavers using paver spacers or by eye. Use a paver splitter or wet saw to cut pavers to fit curves, borders, or obstacles. The video shows intricate curves and different paver sizes, requiring careful measurement and cutting. Once a section is laid, gently tap pavers with a rubber mallet if needed to ensure they are level and properly seated.
Goal: Install all pavers according to the design plan, including main walkway and accent areas.
Tools and materials
- Paver Spacers Various — Ensuring consistent joint spacing between pavers
- Paver Splitter Various — Cutting pavers for straight lines
- Pencil/Marker Various — Marking cut lines on pavers
- Rubber Mallet Various — Tapping pavers into place and ensuring levelness
- Safety Glasses Various — Protecting eyes during paver cutting
- Tape Measure Various — Measuring pavers for cuts and placement
- Wet Saw Various — Making precise and curved cuts in pavers
- Darker — Curved accent areas and borders
- Light-colored Rectangular Pavers — Main walkway section