Powder Coating Application and Curing

we're in the actual powder coating booth this is Terry Terry's a guy that does the powder coating so what you have here is a series of hooks with an electromagnetic charge on them basically the powder is spread upon the material here the steel and this is a 44 inch rough cut deck and then it goes through here to a room where it's cured in other words it's heated up and that powder is melted on so powder coating is a whole lot better than paint it's gonna last a whole lot longer and Terry's getting the job done here awesome once again expanding on the variety of products that Swisher makes this is the Swisher response it's a 54 inch cut it's a 24 horsepower Briggs & Stratton engine on there and it's towing a 60 inch cut so you could theoretically cut a hundred and fourteen inch swath with just a zero turn in a pull behind that makes mowing the yard quick man awesome stuff let's finish up here in the factory I want to show you guys the storm shelter so we've seen the door being welded up in the factory in the welding Department this is the ESP safety shelter it serves as a safety shelter for tornado it serves as a vault and it also serves as a panic room in case of intruder in your house let's go around here to check it out this thing is super duper impressive once we get our shop built on our farm this is going to be a must so let's take a quick look inside the storm shelter super duper impressive so this is verified by the national storm shelter association to meet and or exceed fema standards for a tornado shelter now if