Connecting Baler PTO and Hydraulics
At 7:13 in
BALING AND RAKING HAY....ENDS IN TRAGEDY!! BALER CATCHES FIRE!
What happens here
The presenter proceeds to connect the PTO shaft first, ensuring it's properly greased and locked in place. He then connects the two hydraulic lines that go to the rear remote ports. These lines operate the baler's string-tying mechanism. The remaining two hydraulic lines, which control the opening and closing of the baler's rear gate, are run over the tractor's fender to connect to the front loader's hydraulic ports. He mentions using black nitrile gloves, though he recommends sturdier, grippier gloves (like orange ones) for such tasks. Inside the baler's side compartment, he points out the string spools and notes that all internal bearings are sealed, requiring no greasing.
Goal: Connect the PTO shaft and all hydraulic lines to the tractor.
Tools and materials
- Black Nitrile Gloves — Protecting hands from grease and dirt
- Grease Gun — Lubricating the PTO shaft
- Grease — Lubricating the PTO shaft
- Hydraulic Extension Lines — Extending hydraulic reach to front loader ports
- Hydraulic Lines — Controlling string tying and gate operation
- John Deere 385 Baler John Deere — The machine being connected
- John Deere Tractor John Deere — Connecting points for PTO and hydraulic lines
- PTO Shaft — Transmitting power from the tractor to the baler
- Zip Ties — Securing hydraulic lines out of the way
- String TYT 9000 — Tying hay bales