Skip to main content
Stesso

Labeling and Orienting Cabinet Doors

5:37
7:10
102.6K views

At 5:37 in

AMAZING Cabinet Painting Tips!!! Holes in Cabinet Doors....

Watch on YouTube

What happens here

To ensure proper reinstallation and to know where to drill holes for vertical spraying, it is important to mark each cabinet door. When removing doors, label them (e.g., 'T' for top, 'B' for bottom) on one of the hinge areas. The location of the handle also helps identify the orientation. Place a piece of tape over the labels to protect them during spraying. This helps distinguish between upper and lower cabinet doors, guiding where the holes for the cup hooks should be drilled.

Goal: Correctly identify and mark cabinet doors for proper hole placement and reinstallation.

Tools and materials

  • Marker — Labeling doors
  • Masking Tape — Covering labels on doors

What they say

Hide

go on the top bottom ones holes are to go to the Bottom now how do you know which one is the top one and the bottom one when you remove the cabinet doors just make sure you mark in one of the hinges t for top or B for bottom and then you're going to know put a piece of tape over that so you don't spray it because you always want to have your labels hinges everything labeled but the handle is going to tell you a little bit about where you know the cabinet door came came from but this one label it t for top so you know it's going to be up here handles down here drill your two holes and Away you go hopefully this videos helped you the spraying rocks and

Auto-generated from the video audio.