Drill Holes and Install Cup Hooks for Hanging

What happens here

To prepare the cabinet doors for the hanging system, you will need to drill pilot holes and install cup hooks. First, use a drill to create a 3/32-inch pilot hole, approximately 1/4 inch deep, into the desired edge of the cabinet door. Then, screw the cup hooks into these pilot holes. The cup hooks should be spaced approximately 10 inches apart to ensure stable hanging. For bottom cabinet doors, drill the holes on the bottom edge; for top cabinet doors, drill them on the top edge. This strategic placement will make the holes virtually invisible once the doors are reinstalled.

Goal: Create attachment points on cabinet doors for the hanging painting system.