Cut and Melt Second Rope End

7:27

11:56

408.1K views

At 7:27 in

Adding New Rope To A 24" Extension Ladder. Re-rope a ladder. How to repair a ladder.

Watch on YouTube

What happens here

Once the optimal length is determined (typically leaving about one foot of excess when the ladder is fully retracted), use a razor knife or scissors to cut the rope. Immediately after cutting, use a lighter to melt the newly cut end of the rope. Apply the flame carefully until the fibers fuse, preventing future fraying. This step is critical for the longevity of the rope.

Goal: Prepare the second end of the rope for a clamp and prevent fraying.

Tools and materials

Lighter — Melting rope ends
Razor Knife — Cutting the rope
Rope Purchased from Home Depot — Being cut and melted

What they say

(609 characters)

Hide

it. Get it you'll a little bit loose and come to get about a foot cuz we're going to make one more loop if we wanted to to actually attach the rope right there. And with our other clamp. So we're looking at a rope. We got it extended down. I'm going to go about 2 ft extra. Get my knife. Very careful. Little plastic's very hot. When you're I take and like to push it down with my hands to get it all nice and tight. The center of the rope doesn't melt melt nearly as easy. So, you got to get the flame on it just a little bit more. Now, the rope is melted on the end and it won't fray. Be careful. The end of

Auto-generated from the video audio.