Skip to main content
Stesso

Cut and Clamp Second Rope End

7:16
11:56
408.1K views

At 7:16 in

Adding New Rope To A 24" Extension Ladder. Re-rope a ladder. How to repair a ladder.

Watch on YouTube

What happens here

After testing, determine the desired amount of slack in the rope when the ladder is fully retracted. For a clean look and efficient operation, the rope should hang loosely but not excessively. Measure out approximately 1 foot to 2 feet of excess rope beyond the second-to-last rung when the ladder is fully closed. Cut the rope to this length using a knife or scissors, then melt the newly cut end with a lighter to prevent fraying. Finally, attach the second rope clamp to create a loop at this end, securing it with pliers. This second loop will be used to secure the rope to the second-to-last rung, keeping it tidy.

Goal: Adjust the rope length and secure the second end with a clamp.

Tools and materials

  • 24ft Extension Ladder — Reference for rope length and attachment point
  • 3/8-inch Diamond Braided Poly Rope — Measuring, cutting, and clamping the second end
  • Lighter or Matches — Melting the cut rope end
  • Pliers — Crimping the rope clamp
  • Rope Clamp — Securing the second rope loop
  • Scissors or Razor Knife — Cutting the rope

What they say

Hide

and all the way down. Once it's all the way down, you can actually take the rope itself, come to the second to the last rung right here, and you'll want to measure it. Get it you'll a little bit loose and come to get about a foot cuz we're going to make one more loop if we wanted to to actually attach the rope right there. And with our other clamp. So we're looking at a rope. We got it extended down. I'm going to go about 2 ft extra. Get my knife. Very careful. Little plastic's very hot. When you're I take and like to push it down with my hands to get it all nice and tight. The center of the rope doesn't melt melt nearly as easy. So, you got to get the flame on it just a little bit more. Now, the rope is melted on the end and it won't fray. Be careful. The end of the lighter is hot, so be careful with it. So now we can come down to the second to last rung. You can actually leave the process done right here. And that's your rope. And the ladder can be done if you don't want this rope actually hanging loose. You can actually just come down, loop it through the second to the last rung, just like this. You can take up the excess. And I'll take it. I'll get it about 6 in from there. And that's a little bit too much. So I'll just come up to right about here. I'll take my rope clamp.

Auto-generated from the video audio.