Understand New Cutting Edge Material and Sourcing

okay so we've got jack he's actually the president of may west and you guys are like the pali people so what is this jack so this is either a high density polyethylene or ultra high density polyethylene but this is re-grind okay see the little speckles in there okay um not a bad product we actually use it for quite a few different things uh but essentially they take that plastic grind it all up re-melt it together and produce that new sheet okay so what we're going to be putting on your rig here stan is virgin so it's it's right out of the mill it hasn't been reprocessed it has longer strains uh for the you know the the plastic itself okay and it should uh you know last longer than this one even okay so one of the important things that i want to point out to the guys is they're doing it the important thing is is you need to extend the edge of your cutting edge out because this is a wear point and this is the reason why we're actually replacing it you can actually see where i've already started to grind into it the rest of the cutting edge still has life but extending it out right there is kind of one of those little critical elements that as these guys are doing it and you're doing it for them we got to do it because nancy you and i and alex walk through how to build this thing because of the measurements are the length is longer but it sticks out and the measurements can be off a little bit so make sure you get those measurements right when you guys are going to order your own just a good point to you so all right well let's go in and start checking out the process then