Operating the Front-End Loader and Backhoe Controls

okay and you have it set up for both ptos but you don't have it in gauge yeah i don't have a pto back there so i don't need the ppt so here's the engagement of it so that engages the pto okay hey this is your diff lock right here that's your difference yeah just for the back though you just hold it i don't think it has a front diff lock oh oh so you so it's a temporary diff dip box okay it's stuck you just hold that down it'll kick in okay so you don't they don't want you holding that and driving around with it because you'll tear the machine apart right okay here's your mower deck height if you have a mower deck on it okay um next to that this uh adjusts the on the uh the three-point hitch it adjusts how much uh you know how fast it goes up and down okay okay your throttle right that's your throttle uh quick disconnect so that disconnects all four at once wait all four what hydraulics so when you're taking the loader off oh my god you can flip this one lever up and all four get released nice yeah that's cool nice this is your main controls for the front boom obviously it has you know curl back forward down float flow speeds travel speed travel speed travel speed okay four wheel drive two wheel spin the seat you basically just pull up on here and then it just spins around there we go and then it locks down on that side so then you have the backhoe uh out you have your out this is a lock lock st lock some outriggers and then your controls for your backhoe but that's not standard equipment okay what engine does this have um it's got a uh so we pull