Skip to main content
Stesso

Method 2: Intermediate Drywall Repair - Tape and Mud

5:11
9:02
76.8K views

At 5:11 in

3 Different Ways to Repair Drywall

Watch on YouTube

What happens here

Apply a thin layer of drywall compound over the seams of the newly installed patch and the screw heads. Press drywall tape over the wet compound along all seams, then immediately apply another thin layer of compound over the tape, feathering it out into the existing wall. This step helps to reinforce the seams and blend the patch smoothly. Allow the compound to dry completely.

Goal: Cover seams with drywall tape and compound, blending the patch into the wall.

Tools and materials

  • Drywall Compound Easy Sand 20 — Filling seams and covering the patch
  • Drywall Knife — Applying compound and tape
  • Drywall Tape — Reinforcing drywall seams
  • Metal Pan — Holding drywall compound

What they say

Hide

now that our drywall patch is on we have to now cover all these seams to allow it to be one with the existing piece of drywall this is where the drywall tape comes in and the drywall mud apply the beginning coat where the drywall will go covering all these seams lay your drywall tape over the seams and squeeze out all the excess joint compound laying it flat anything extra that comes out i like to put it right back over the tape to allow for better contact [Music] because this patch is small there is a gap down in the middle because it doesn't have any texture anything on it so i'm basically covering my bases saving one extra step by creating the float down the middle to have one even area so you can dry together we're gonna let it dry and then we sand the mud is

Auto-generated from the video audio.