Installation and Assembly Process

0:41

1:35

31.9K views

At 0:41 in

2 Electricians Banter on the Difference between A Load Center Vs. Panel Board #hendythesparky

Watch on YouTube

What happens here

The father illustrates the installation differences between the two systems. For a panel board, the 'back box' (the enclosure) is mounted first. This allows electricians to 'run all your conduits' (electrical piping) and complete the rough-in wiring before the internal electrical components ('interior') are installed. This modular approach is convenient on a job site. Conversely, a load center typically 'already comes pre-built,' meaning the backbox and interior components are assembled together from the factory, offering a more consolidated, 'all-in-one' installation.

Goal: Compare the installation procedures and modularity of load centers and panel boards.

Tools and materials

Backbox — Shown as the initial part of a panel board installation
Conduits N/A — Mentioned as electrical piping that is routed to the backbox during panel board installation
Electrical Load Center — Visually demonstrating a pre-built, all-in-one electrical unit
Electrical Panel Board — Visually demonstrating the separate backbox and interior installation process
Interior — Discussed as the internal electrical components installed after the backbox and conduits

What they say

(530 characters)

Hide

usually specifically at a supply house. Yeah. Cuz this is the panel board right here, and that's the load center over there. Correct. So is a separate piece. So when you buy panel board, you're going to get the back box separately, which is kind of nice. So when you're on a job site, it's nice to get the backboard so you can mount the backboard, run all your conduits, and then later put your interior in. Whereas at a load center, it already comes pre-built. Oh, I see. So you you're not putting in the interior. You open it up

Auto-generated from the video audio.