Skip to main content
Stesso

Finish Clamp and Trim Excess

0:36
1:01
106.2K views

At 0:36 in

10 times stronger & 90% lighter. #best #hose #clamp

Watch on YouTube

What happens here

Once the wire is sufficiently tensioned and locked by the tool, flip the tool 180 degrees to complete the securing process. Then, back the tool away from the newly formed clamp. Using a pair of cutters, snip off the excess wire close to the clamp, ensuring no sharp edges are protruding. The finished hose clamp will be brand new, about ten times stronger, 90% lighter than traditional clamps, and provide a full 360-degree seal.

Goal: Complete the wire clamp and remove any superfluous wire.

Tools and materials

  • ClampTite Tool ClampTite Tools — Completing the clamp and backing away
  • Cutters — Trimming the excess wire
  • Wire — The completed clamp

What they say

Hide

going too tight it's added even pressure all the way around so you won't cut your hose finish it off we're going to flip that 180° okay just like that back the tool away our Cutters real quick stick that off that's your brand new hose clamp 10 times stronger 90% lighter better than the most CU you get a 360 seal all the way around where do you guys find this at clamp tight tools.com all right CL

Auto-generated from the video audio.