Skip to main content
Stesso

1 tool, 1truck, 12 trailers... #heavyequipment #contractor #bluecollar

1:07
33K views

Video by Stanley "Dirt Monkey" Genadek

Stanley "Dirt Monkey" Genadek

Watch on YouTube

What happens here

This project demonstrates the quick and efficient method of operating a trailer's landing gear using the 'Trailer Gearbox' in conjunction with a cordless drill. The process involves attaching the gear reduction unit to the trailer's main landing gear shaft, securing it with a pin, and then using a standard drill to raise or lower the landing gear, significantly reducing manual effort and preventing drill burnout. The portability of the gearbox allows for its use across multiple trailers.

Transcript

Hide

All right, Dan. What are we looking at with this one now? >> This one is the trailer gearbox one. All I got to do with this, see that? Slide that right on the main shaft there. >> Put the pin in. >> And I'm ready to go. And then the best part about this, >> you can leave this right on or take it right back off again, throw it in your truck, or I can walk over to another trailer and put it right on there. >> So, you can just have this. This is a gear reduction box, so you're not burning out your drills. You can keep this in your truck and it it'll mount on any trailer that truck pulls. >> One per tow vehicle. If you have to 12 trailers and one vehicle, that's all you need. >> What's the website? >> www.trageearbox.com. >> Very good. Thank you, sir. >> Yes.

Auto-generated from the video audio.