Skip to main content

Damp Mop with pH-Neutral Cleaner — Rinse the Floor (If Necessary)

Beginner3 hours

Part of project

Hardwood Floor Cleaning · Step 3 of 6

Helpful?

In this video

For the final step, use a two-compartment bucket. Fill both compartments with hot water. In one compartment, add a pH-neutral cleaner, such as Mr. Clean Professional Disinfecting Floor and Surface Cleaner. Dampen a clean microfiber mop head in the regular water compartment, then dip it into the cleaning solution compartment. Crucially, wring out the mop thoroughly until it is only damp, not wet, to prevent leaving excess water on the hardwood. Excess water can damage the floor. Mop the floor starting from the furthest point in the room and working your way towards the exit. Ensure the floor is completely dry before placing any rugs back down to prevent moisture from being trapped, which can lead to discoloration or damage.

110.8K views2.4K

FAQs

What type of mop is best for cleaning hardwood floors without causing damage?

For hardwood floors, a microfiber mop is ideal as it's effective for both dry sweeping and damp mopping. Tools like the HDX Giant Microfiber Wet-Dry Flip Mop or O-Cedar Hardwood Floor 'N More Mop are excellent because they pick up dirt efficiently without oversaturating the wood, which helps prevent damage.

What are the most important things to avoid when cleaning hardwood floors?

The biggest mistakes are using too much water, which can warp or dull the wood, and using harsh abrasive cleaners or steam mops. Always use a barely damp mop, never soaking wet, and stick to cleaning solutions specifically formulated for hardwood floors, such as ZEP Hardwood and Laminate Floor Cleaner.

How long does a thorough hardwood floor cleaning typically take, and is it a difficult DIY task?

Cleaning hardwood floors is considered a beginner-level DIY project. A routine clean with dry and damp mopping might take less than an hour. However, a deeper clean, including spot treatment and an optional polish, can take up to 3 hours, depending on the floor's size and condition.

My hardwood floors look dull or streaky after cleaning. What did I do wrong?

Dullness or streaks often result from using too much cleaning solution, not rinsing the floor properly (if your cleaner requires it), or not drying the floor completely. Ensure you wring your mop almost dry, use the recommended amount of ZEP Hardwood and Laminate Floor Cleaner, and always dry the floor immediately with a clean, dry microfiber cloth after damp mopping.