Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 2 · Install Anti-Slip Treads

Carefully measure and mark the placement for the anti-slip treads on each stair. Typically, these are applied to the front edge of the tread, leaving a small margin from the riser. Peel back the protective liner from the adhesive side of one tread, and carefully align it with your markings. Press down firmly, working from the center outwards to ensure good adhesion and eliminate any air bubbles. Repeat for all treads.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Install Anti-Slip Treads

Carefully measure and mark the placement for the anti-slip treads on each stair. Typically, these are applied to the front edge of the tread, leaving a small margin from the riser. Peel back the protective liner from the adhesive side of one tread, and carefully align it with your markings. Press down firmly, working from the center outwards to ensure good adhesion and eliminate any air bubbles. Repeat for all treads.

Videos for this step

Apply Anti-Slip StripApply Adhesive-Backed Anti-Slip ProductsInitial Tread Application

Tools and Materials

← Project

How to Stop Stair Treads from Sliding on Wood Stairs

Step 2 of 3·1.8 hr left

Clean the Stair Treads
30 minutes4 items
2
Install Anti-Slip Treads
45 minutes3 items
3
Secure Treads with Screws (Optional)
60 minutes5 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.