Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 2 · Position the Outdoor Unit

The outdoor unit, or condenser, must be placed on a solid, level pad. This pad can be a pre-fabricated concrete or composite base. Ensure there is at least 2 feet of clearance around the unit for proper airflow and service access. Avoid placing it directly on the ground, as this can lead to corrosion and blockages. The location should also consider proximity to the indoor unit, the electrical supply, and potential refrigerant line runs. Check local ordinances for any specific setback requirements from property lines or buildings.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Position the Outdoor Unit

The outdoor unit, or condenser, must be placed on a solid, level pad. This pad can be a pre-fabricated concrete or composite base. Ensure there is at least 2 feet of clearance around the unit for proper airflow and service access. Avoid placing it directly on the ground, as this can lead to corrosion and blockages. The location should also consider proximity to the indoor unit, the electrical supply, and potential refrigerant line runs. Check local ordinances for any specific setback requirements from property lines or buildings.

Videos for this step

Installing the Outdoor Condenser UnitPosition and Secure Outdoor UnitPlace Outdoor Condenser

Tools and Materials

← Project

Professional Installation Recommendation

Step 2 of 5·8 hr left

Verify Electrical Requirements and Connections
120 minutes10 items
2
Position the Outdoor Unit
60 minutes7 items
3
Install Refrigerant Lines and Condensate Drain
180 minutes12 items
4
Connect Ductwork to Indoor Unit
90 minutes9 items
5
Perform System Startup and Initial Checks
150 minutes10 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.