Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 4 · Install Carpet Treads

Align the first cut carpet tread with the edge of the adhesive-covered step. Gently press the carpet down, starting from the edge closest to the riser and working your way outwards to the nose of the step. Apply firm and even pressure across the entire surface of the tread to ensure good contact with the adhesive and eliminate any air bubbles or wrinkles. Use a roller or your hands to firmly press the carpet into place.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Install Carpet Treads

Align the first cut carpet tread with the edge of the adhesive-covered step. Gently press the carpet down, starting from the edge closest to the riser and working your way outwards to the nose of the step. Apply firm and even pressure across the entire surface of the tread to ensure good contact with the adhesive and eliminate any air bubbles or wrinkles. Use a roller or your hands to firmly press the carpet into place.

Videos for this step

Install Carpet TreadsInstall a Single Stair TreadPosition and Adhere Treads

Tools and Materials

← Project

How to Install Outdoor Carpet Stair Treads on Concrete Steps

Step 4 of 6·4.3 hr left

Clean Concrete Steps
60 minutes2 items
Measure and Cut Carpet Treads
45 minutes4 items
Apply Adhesive to Steps
30 minutes2 items
4
Install Carpet Treads
60 minutes2 items
5
Secure Edges and Trim (if necessary)
30 minutes2 items
6
Allow Adhesive to Cure
168 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.