Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 3 · Apply Adhesive

Apply the chosen adhesive to the back of one carpet tread at a time, or directly onto the corresponding stair tread according to the adhesive manufacturer's instructions. Spread the adhesive evenly using a putty knife or the applicator provided with the adhesive. Avoid applying too much, which can cause excessive squeeze-out, or too little, which can result in poor adhesion.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Apply Adhesive

Apply the chosen adhesive to the back of one carpet tread at a time, or directly onto the corresponding stair tread according to the adhesive manufacturer's instructions. Spread the adhesive evenly using a putty knife or the applicator provided with the adhesive. Avoid applying too much, which can cause excessive squeeze-out, or too little, which can result in poor adhesion.

Videos for this step

Apply Adhesive to TreadsApply Carpet Adhesive to StairsApply Adhesive to Carpet and Subfloor

Tools and Materials

← Project

How to Install Carpet Treads on Painted Stairs Without Peeling the Paint

Step 3 of 5·2 hr left

Clean the Stairs
30 minutes2 items
Mark Tread Placement
15 minutes2 items
3
Apply Adhesive
45 minutes2 items
4
Attach Carpet Treads
60 minutes1 items
5
Cure and Inspect
15 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.