Attach and Adjust Land Pride TR3 Rake
11:35
30:01
57.5K views
At 11:35 in
You've never seen all these tractors put to work on the same project! Farm Tools!
What happens here
Prepare the Land Pride TR3 rake for use by adjusting the height of its wheels and the scarifiers (also known as rippers or tines). The wheels roll along the ground, and there are five holes for adjusting the axle height. The scarifiers penetrate the ground to loosen it. For this project, the scarifiers are set to dig approximately 3 inches into the ground. This adjustment is made by removing a pin, sliding the axle up or down to the desired hole, and re-inserting the pin. The rake's design also allows for different angles of the scarifiers for varying levels of aggressiveness.
Goal: Configure the TR3 rake for effective ground loosening and leveling.
Tools and materials
- John Deere Tractor John Deere — Powering and maneuvering the TR3 rake
- Land Pride TR3 Rake Land Pride — Loosening and leveling the ground
- Pins — Securing the axle height adjustments