Lubricating Chassis Points (Greasing)

totally within tolerance here now this is the X 11:40 which has four seats or two seats so the bed folds up and shortens to make four seats I'll fold this back down and put it back into the to seat configuration which is mainly what we use here on the farm but we needed a four-seater for transporting people in case we wanted to show somebody the place or ride people around we had the little two-seater John Deere 825 I and it just wasn't big enough we couldn't haul people around in it so that's why we got the Kubota and I like it we'll start the machine up real quick raise the dump bed all right so we dumped the bed back for a purpose there's some lubrication points underneath the bed that we need to address and I'm going to check the oil one more time just to make sure the engine oil filters done transmission filters are done we checked the brake pedal parking brake adjust if needed we're good to go on that brake light switch it works front brake case all that stuff is just inspection stuff basically here and then there's some lubrication points on the chassis that we need to get into parking brake lever battery terminal needs to be checked cargo lifts cylinder pivot and that's why we had the bed of the Kubota up and we have drive links that need to be done four-wheel drive link all kinds of stuff that needs to be done here if you're not up for this take it to your Kubota dealer front a arm suspension and rear a arm suspension lots of stuff we're going to get underneath here and start greasing well guys according to