Spray Upper Vertical and Corner Tracks

What happens here

Before any painting begins (not fully shown in this video segment, but crucial for the success of the project), ensure the garage door tracks and surrounding areas are clean and free of dust, grease, or rust. Thoroughly mask off all adjacent surfaces that should not be painted, such as brick, exterior trim, and the garage door panels themselves. Use high-quality painter's tape to secure masking paper or plastic sheeting. Once preparation is complete, the painter starts by spray painting the upper vertical sections of the garage door tracks. They utilize an airless paint sprayer equipped with a long extension wand to comfortably reach these elevated areas. The spray gun is moved in smooth, consistent, overlapping passes to ensure uniform paint coverage on the metal tracks and to avoid drips or streaks. The painter then moves to the corner sections where the vertical tracks transition into the horizontal tracks, maintaining the same careful spraying technique.

Goal: Apply an even coat of paint to the upper vertical and connecting corner sections of the garage door tracks.