Lift and Position Engine/Transmission Assembly

good there good there it's free ready to go beautiful sunset let's get the tractor we're gonna pull the pallet forks over top of this and we're gonna figure out a way we can run a big ratchet strap around and hook to the pallet forks guys this is the part of the video where you told me you don't need a cherry picker just use your track of it I thought man that sounds dangerous here we go I just so happened to pick up brand new ratchet straps the other day to put on our gooseneck trailer perfect first use for these things get it wrapped around here without wrapping it around something that we don't want to pull FYI this is not the right way to do things guys this is not the right way to remove an engine from a vehicle those Forks are gonna fall down on that tractor and crush you no they're not we're cool same guy that made the Rubik's Cube invented these ratchet straps all right pain in the butt can my own ratchet strap don't fail me now I did pick up the world's longest ratchet straps you just keep going and going okay he's gonna be heavy it's pulling the forks down on the tractor we're going to fire the tractor back up latest things heavy it's just about picking up the entire Jeep we need to back off on my rear strap a little bit here take your back of Klinker - all right so we don't want it to slide off this way so we've got to take and tilt our bucket up as we tilt our bucket up we still have one bolt down here that needs to be removed so we're going to tilt it back a little bit and try and remove that bolt is removed but it's still trying to pick up the entire rear of the Jeep it's not going to work it's not gonna work we've neglected two parts we need to take the u-joints a loose from the back of the transfer case in the front of the transfer case I think that's what our problem is let go this is me wishing that all modern cars were as simple to work on is this old Jeep instead of struggling with this I just jacked it up so I could what in the world so I could just rotate it around and make life easy I was gonna have to struggle to get that last bolt off but now I don't awesome u-joint number one removed so the front u-bolt should just come right out same way long is it it will hold still should just come right out there's just four bolts holding these in place very simple and they're all soaked in grease and have been soaked in grease for a very very long time big crowbar out here and hold everything in place and rock and roll there is a bad seal on…