Skip to main content
Stesso

Clean Tools and Remove Protective Gear

4:05
6:11
4.5K views

At 4:05 in

Why You Should NEVER Grind Your Epoxy Floor Again…

Watch on YouTube

What happens here

Once the entire floor is primed, and you are working your way out of the garage, it's crucial to manage your tools and protective gear. Clean your spiked shoes thoroughly while the epoxy primer is still wet on them. This prevents dried epoxy from becoming permanent and potentially damaging other surfaces. The video emphasizes that FrogTape is used to prevent primer from bleeding underneath, highlighting the importance of proper masking. Remove the spiked shoes carefully as you exit the primed area, hand them to a partner or place them in a designated box or area for cleaning. Cleaning them immediately is much easier than once the epoxy has cured.

Goal: As you finish the priming process, clean your spiked shoes while the epoxy is still wet to prevent permanent adhesion. Also, ensure FrogTape and any other protective coverings are properly positioned to avoid primer bleeding.

Tools and materials

  • FrogTape
  • Rags/Wipes
  • Spiked Shoes
  • Cleaning Solution N/A

What they say

Hide

we're just doing what we need. So, I'm working my way, you know, out of the garage now. And so, you I just kind of work my way out in a logical place. Uh remove my spike shoes before I step out with them because you don't want to step out your spike shoes cuz they got epoxy on the bottom of the spikes. So, you don't want to walk out on the concrete and puts your um black spots on it. You also don't want to walk with your spike shoes on your drop cloth and rip your drop cloth or poke through it and put epoxy through that. And you don't want to necessarily get epoxy on your drop cloth either. So just step out of your spike shoes when you're on the floor and you hand them to somebody or just you know set them in a box or something and then while it's wet just clean them off. So, you just take crocodile cloths and while the epoxy's wet or the primer is wet on your spikes, you can clean them off. Like Tonyy's cleaning them off right now. And um it's just a lot easier to clean them off while they're wet. So, floor is all primed. We're going to be back in 4 hours. Begin uh getting ready

Auto-generated from the video audio.