Evaluate Results and Sprayer Performance

[Music] sprayed now masking pole just cleaning up just kind of a few things you know about the product so I was using a an acrylic 100 waterborne acrylic enamel and they're recommended for enamels to use the head that I used now if I was on a larger product project I probably would have switched over to the other head and use the fine finish head I wanted to get a lot of product on at once so it would gel out because I wanted it to be really thick and heavy because it's a slide with semi-gloss so I wanted to be slick so I was concerned that you know the fine finish head would put it on you know too thin and being breakthrough that it would dry too fast and it wouldn't gel out end up you know rough but um you know next time I would probably try a different head um also a lot of overspray if I was using an airless sprayer I would have never had this amount of overspray got to be concerned with the thing when you turn it on it winds up and it so it's not at full pressure when you first pull the trigger and so it starts spraying it definitely spits so you definitely got to be concerned about spits if you're trying to do something and getting a really fine finish that's where professional airless sprayers don't have you know that or what we call dead banding where the pressure goes up and down you know has a thing um has the pump is pumping so you know this is once again this is a little small unit that isn't running at high PSI so it's um so it's not going to atomize the paint nearly as well see once I turned it up all the way up it atomized it better definitely not like an airless sprayer it's heavy um so it gets definitely tiring holding it using it it's got a cord you're kind of dragging around with it um