Apply Chalk Paint with HVLP Sprayer

What happens here

Begin by ensuring the dresser is thoroughly prepped, which typically involves cleaning, light sanding, and masking off any areas not intended for paint, such as the interior of the drawer cavities. In the video, these areas are protected with masking paper. Load your HVLP (High Volume Low Pressure) spray gun with properly thinned chalk paint. If your chalk paint requires thinning for spray application, follow the manufacturer's recommendations carefully to achieve the correct viscosity for a smooth, even spray without sputtering or excessive drips. Wear a respirator mask, safety glasses, and protective gloves for safety. Position yourself to comfortably reach all surfaces. Apply the paint in thin, even coats, moving the spray gun in consistent, overlapping passes (typically 50% overlap). Maintain a consistent distance from the dresser surface to ensure an even finish and avoid paint buildup. Systematically cover the top, sides, and all visible exterior frame components of the dresser. The painter in the video demonstrates moving around the dresser, adjusting their posture (standing, crouching) to spray from various angles and ensure comprehensive coverage, paying attention to corners and edges. Allow adequate drying time between coats as per the paint manufacturer’s instructions, and repeat for additional coats if necessary to achieve full opacity and depth of color. After application, properly clean the HVLP spray gun to maintain its functionality.

Goal: This step demonstrates the application of chalk paint to the exterior surfaces of a dresser using an HVLP spray gun. The painter uses careful, overlapping passes to achieve a uniform, smooth, and matte finish, while wearing essential personal protective equipment.