We caught them sitting on the job. So we gave them a "raise". #diy #snowplow #equipment #shorts

Snow Power changed their main lift cylinder from a dual bottle design to a massive single cylinder to keep the back moldboard from twisting even under the heaviest loads. And this allows the truck to have both up pressure and down pressure. The down pressure can actually lift the truck off the back of the ground. And that's really designed to give you the cleanest scrape possible. >> this is the stops so that when you're plowing bass-ackwards, you can't kitty-wampus this underneath it. So now show me the action of cutting wings, will you? Now if you look closely, you'll see that the actual cutting edge is separate than the moldboard. And that's specifically designed to allow the cutting edge to contour to the ground to give you a closer shave. But let's just watch it in action. Now this is 16-ft wide, Rick? 16-ft. And that's the new addition by Snow Power with added lights on the sides, a new connection method on the back, lower profile for the control box.