Drill and Secure the Power Locker

What happens here

Place the red 'Power Locker' wheel chock system onto the wooden trailer deck at the desired location where the equipment's wheel will rest. Using the pre-drilled holes in the Power Locker as a template, mark the corresponding spots on the trailer deck. Then, use a Milwaukee cordless drill with an appropriate drill bit to create holes through the trailer bed. Once the holes are drilled, align the Power Locker and secure it in place using bolts, washers, and nuts, ensuring all fasteners are tightly secured for maximum stability. The video shows Robbie and Wyatt actively drilling and preparing to bolt the system down.

Goal: Permanently mount the Power Locker to the trailer deck.